About Us | Help Videos | Contact Us | Subscriptions
 

Abstract

  VZJ Banner

This article in VZJ

  1. Vol. 9 No. 1, p. 181-186
     
    Received: Apr 1, 2009


    * Corresponding author(s): u.rosenbaum@fz-juelich.de
 View
 Download
 Alerts
 Permissions
Request Permissions
 Share

doi:10.2136/vzj2009.0036

Sensor-to-Sensor Variability of the ECH2O EC-5, TE, and 5TE Sensors in Dielectric Liquids

  1. U. Rosenbaum *,
  2. J.A. Huisman,
  3. A. Weuthen,
  4. H. Vereecken and
  5. H.R. Bogena
  1. Agrosphere Institute, ICG-4, Forschungszentrum Jülich GmbH, 52425 Jülich, Germany

Abstract

Low-budget sensors used in wireless soil water content sensor networks typically show considerable variation. Because of the large number of sensors in sensor network applications, it is not feasible to account for this variability using a calibration between sensor response and soil water content. An alternative approach is to split the calibration into two parts: (i) determination of sensor response–permittivity relationships using standard liquids with a defined reference permittivity, and (ii) site-specific calibration between permittivity and soil water content using a subset of sensors. In this study, we determined sensor response–permittivity relationships for several ECH2O, EC-5, TE, and 5TE sensors by Decagon Devices (Pullman, WA). The objectives of this study were to determine (i) the sensor-to-sensor variability and precision of these sensor types, and (ii) the increase in accuracy when a sensor-specific calibration is used instead of a single calibration. The results showed that the sensor-to-sensor variability was significantly larger than the measurement noise for each sensor type. When a sensor-specific calibration was used, the RMSE expressed in (equivalent) soil water content ranged from 0.008 cm3 cm−3 for the TE sensor to 0.014 cm3 cm−3 for the EC-5 sensor in a permittivity range between ∼2 and 35. When a single calibration was used, the RMSE was higher and ranged from 0.01 cm3 cm−3 for the 5TE sensor to 0.02 cm3 cm−3 for the TE sensor. An improvement in accuracy of nearly 0.01 cm3 cm−3 can be reached in the high-permittivity range for each sensor type by calibrating each sensor individually.

  Please view the pdf by using the Full Text (PDF) link under 'View' to the left.

Copyright © 2010. Soil Science SocietySoil Science Society of America